User Manual

Configure Quality of Service
531
M6100, M5300, and M7100 Series Managed Switches
This field also lists all the existing DiffServ class names, from which one can be selected.
The switch supports only the Class Type value All, which means all the various match
criteria defined for the class is satisfied for a packet match. All signifies the logical AND of
all the match criteria. Only when a new class is created, this field is a selector field. After
class creation this becomes a nonconfigurable field displaying the configured class type.
9. To rename an existing class, select the check box next to the configured class, and update
the name
10. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
11. To remove a class, select the Class Name check box and then click the Delete button.
To refresh the screen with the latest information on the switch, click the Update button.
12. After creating a class, click the class name for an existing class.
The class name is a hyperlink. The following figure shows the configuration fields for the
class.