User Manual

Multicast Routing
502
M6100, M5300, and M7100 Series Managed Switches
8. Use the Search By list to search for multicast entries by Interface or Group:
• Select Interface from the Search list, enter the interface in unit/slot/port format, for
example 1/0/13, then click the Go button.
If the entry exists, it is displayed as the first entry, followed by the remaining entries.
• Select Group from the Search list, enter the MLD group IP, then click the Go button.
If the entry exists, it is displayed as the first entry, followed by the remaining entries.
An exact match is required.
To refresh the screen with the latest information on the switch, click the Update button.
The following table describes the nonconfigurable data that is displayed.
Table 193. IPv6 Multicast MLD Groups
Field Description
Interface The interface for which data is to be displayed.
Group IP The address of the MLD members.
Last Reporter The IP address of the source of the last membership report received for
this multicast group address on the selected interface.
Up Time The time elapsed in seconds since the multicast group was known.
Expiry Time Time left in seconds before the entry is removed from the MLD
membership table of this interface.
Filter Mode The filter mode of the multicast group on this interface. Possible values
are Include and Exclude.
Version 1 Host Timer The time remaining until the router assumes that there are no longer
any MLD version 1 hosts on the specified interface.
Group Compat Mode The compatibility mode of the multicast group on the interface. The
values it can take are MLDv1 and MLDv2.
Source Hosts This parameter shows source addresses that are members of this
multicast address.
Source Address (Expiry Time) This parameter shows expiry time interval against each source address
that is a member of this multicast group. This is the amount of time after
which the specified source entry is aged out.