User Manual

Multicast Routing
478
M6100, M5300, and M7100 Series Managed Switches
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Routing> Multicast > PIM > Interface Configuration.
8. Select the check box beside the interface.
9. In the Admin Mode field, select the Enable or Disable option to set the administrative
status of PIM in the router.
The default is Disable.
10. In the Hello Interval field, enter the time in seconds between the transmission of PIM hello
messages on this interface.
The valid values are from 0 to 18000. The default value is 30.
11. In the Join/Prune Interval, enter the time in seconds at which PIM Join/Prune messages
are transmitted on this PIM interface. The valid values are from 0 to 18000. The default
value is 60.
12. In the BSR Border field, select the Enable or Disable option to set the bootstrap router
(BSR) border status on the selected interface.
13. Enter the DR Priority for the selected interface.
The valid values are from 0 to 2147483647. The default value is 1.
14. Click the Apply button.