User Manual

Multicast Routing
460
M6100, M5300, and M7100 Series Managed Switches
7. Select Routing> Multicast > DVMRP > DVMRP Neighbor.
8. Use the Search menu to search for neighbor entries by MAC Interface or Neighbor IP.
• Select Search > Interface from the list, enter the interface in unit/slot/port format, for
example 1/0/13, then click the Go button. If the neighbor entry exists, the entry is
displayed as the first entry, followed by the remaining entries.
• Select Search > Neighbor IP from the list, enter the neighbor IP, then click the Go
button. If the entry with the matching neighbor IP exists, that entry is displayed as the
first entry, followed by the remaining entries. An exact match is required.
To refresh the screen with the latest information on the switch, click the Update button.
The following table describes the nonconfigurable data that is displayed.
Table 172. DVMRP Neighbor
Field Description
Interface Select the interface for which data is to be displayed, or all the
interfaces are displayed.
Neighbor IP The IP address of the neighbor whose information is displayed
State The state of the specified neighbor router on the selected interface,
either active or down.
Up Time The DVMRP uptime for the specified neighbor on the selected
interface. This is the time since the neighbor entry was learned.
Expiry Time The DVMRP expiry time for the specified neighbor on the selected
interface. This is the time left before this neighbor entry ages out, and is
not applicable if the neighbor router's state is down.
Generation ID The DVMRP generation ID for the specified neighbor on the selected
interface.
Major Version The DVMRP major version for the specified neighbor on the selected
interface.
Minor Version The DVMRP minor version for the specified neighbor on the selected
interface.
Capabilities The DVMRP capabilities of the specified neighbor on the selected
interface.
Received Routes The number of routes received for the specified neighbor on the
selected interface.