User Manual

OSPF and OSPFv3
441
M6100, M5300, and M7100 Series Managed Switches
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Routing > OSPFv3 > Advanced > Neighbor Table.
To refresh the screen with the latest information on the switch, click the Update button.
To clear all the neighbors in the table, click the Clear button.
The following table describes the nonconfigurable data that is displayed.
Table 163. Advanced OSPFv3 Neighbor Table
Field Description
Interface The interface for which data is to be displayed or configured. Slot 0 is
the base unit.
Interface Identifier The interface ID that the neighbor advertises in its hello packets on this
link.
Router ID A 32-bit integer in dotted-decimal format representing the router ID of
the neighbor on the selected interface.
Area ID A 32-bit integer in dotted-decimal format representing the area
common to the neighbor selected.
Options A bit mask corresponding to the neighbor's options field.
Router Priority The priority of this neighbor in the designated router election algorithm.
A value of 0 signifies that the neighbor is not eligible to become the
designated router on this particular network.
State The state of the relationship with this neighbor.
Dead Time The amount of time, in seconds, since the last hello was received from
adjacent neighbors. Set to 0 for neighbors in a state less than or equal
to Init.