User Manual

Routing
377
M6100, M5300, and M7100 Series Managed Switches
The web management interface menu displays.
7. Select Routing > VRRP > Basic > VRRP Configuration.
8. In the Global Configuration Admin Mode field, set the administrative status of VRRP in the
router to either Enable or Disable option.
By default, VRRP is disabled.
9. The VRID field is configurable only if you are creating a new virtual router.
Enter the VRID. The valid values are 1 to 255.
10. Select the unit/slot/port for the new virtual router from the Interface list.
11. Enter the Primary IP Address of the virtual router.
12. From the Mode list, select Active or Inactive mode for the new virtual router.
13. Click the Add button.
The virtual router is added to the switch configuration.
14. To delete the selected virtual router, click the Delete button.
Note: The router cannot be deleted if there are secondary addresses
configured.
15. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable data that is displayed.
Table 141. VRRP Global Configuration
Field Description
Interface IP Address Indicates the IP address associated with the selected interface.
State The current state of the virtual router. Possible values are as follows:
• Initialize
• Master
• Backup