User Manual

Configure System Information
37
M6100, M5300, and M7100 Series Managed Switches
8. You can view the CPU Utilization information, which contains the memory information,
task-related information, and percentage of CPU utilization per task.
• Select the Unit No. to display the CPU Utilization information.
• Select All to display the CPU Utilization information for all units in a chassis.
The following table describes CPU Memory Status information.
Configure the CPU Thresholds
The CPU Utilization Threshold notification feature allows you to configure thresholds that,
when crossed, trigger a notification. The notification is done through SNMP trap and syslog
messages.
 To configure the CPU thresholds:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
Table 8. CPU Memory Status information
Field Description
Total System Memory The total memory of the switch in KBytes.
Available Memory The available memory space for the switch in KBytes.