User Manual

Routing
364
M6100, M5300, and M7100 Series Managed Switches
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Routing> ARP > Advanced > ARP Create.
8. Use IP Address to enter the IP address to add.
It must be the IP address of a device on a subnet attached to one of the switch's existing
routing interfaces.
9. Use MAC Address to specify the unicast MAC address of the device.
Enter the address as six 2-digit hexadecimal numbers separated by colons, for example,
00:06:29:32:81:40.
10. Click the Add button.
The static ARP entry is added to the switch.
11. To delete the selected static ARP entry from the switch, click the Delete button.
12. Click the Apply button.
The MAC address mapping to the IP changes. Configuration changes take effect
immediately.
To refresh the screen with the latest information on the switch, click the Update button.
The following table describes the nonconfigurable information displayed on the screen.
Table 136. ARP Cache
Field Description
Port The associated unit/slot/port of the connection.
IP Address The IP address. It must be the IP address of a device on a subnet
attached to one of the switch's existing routing interfaces.