User Manual

Configure Switching Information
294
M6100, M5300, and M7100 Series Managed Switches
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Switching > MLAG > Basic > VPC Global Configuration.
Note: You can navigate to the same screen by selecting Switching > MLAG
> Advanced > VPC Global Configuration.
8. In the VPC Mode field, select Enable or Disable to globally enable or disable the VPC
feature.
By default, the VPC feature is disabled.
9. In the Domain ID field, enter the ID of the VPC domain.
Possible values are 1 to 255. The VPC domain ID must be equal to the domain ID of the
peer for a VPC pair to be formed. The domain IDs are exchanged during role election
and, if they are different, VPC does not become operational.
10. If you select the Remove Domain ID option, the current VPC domain ID is deleted.