User Manual

Configure Switching Information
273
M6100, M5300, and M7100 Series Managed Switches
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Switching > MVR > Basic > MVR Configuration.
8. Use MVR Running to Enable or Disable the MVR feature.
The factory default is Disable.
9. Use MVR Multicast VLAN to specify the VLAN on which MVR multicast data is received.
All source ports belong to this VLAN. The value can be set in a range of 1 to 4093. The
default value is 1.
10. Use MVR Global Query Response Time to set the maximum time to wait for the IGMP
reports membership on a receiver port.
This time applies only to receiver-port leave processing. When an IGMP query is sent
from a receiver port, the switch waits for the default or configured MVR query time for an
IGMP group membership report before removing the port from the multicast group
membership. The value is equal to the tenths of a second. The range is from 1 to 100
tenths. The factory default is 5 tenths or one-half.
11. Use MVR Mode to specify the MVR mode of operation.
Possible values are compatible or dynamic. The factory default is compatible.
12. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
To refresh the screen with the latest information on the switch, click the Update button.