User Manual

Chassis and Stacking
186
M6100, M5300, and M7100 Series Managed Switches
The following table describes the nonconfigurable Stack Status information that is displayed.
Standby Status Identifies the switch that is configured as the standby unit. The possible
values are as follows:
• Cfg Standby. Indicates that the unit is configured as the standby unit.
The unit configured as the standby switch becomes the stack manager if
the current manager fails.
• Opr Standby. Indicates that this unit is operating as the standby unit
and the configured standby unit is not part of the stack.
• None. The switch is not configured as the standby unit.
Switch Status The status of the selected unit. The possible values are as follows:
• OK
• Unsupported
• Code Mismatch
• Config Mismatch
• Not Present
Table 72. Stack Status nonconfigurable fields
Field Description
Hardware Management
Preference
The hardware management preference of the switch, which can be
disabled or unassigned.
Standby Status Identifies the switch that is configured as the standby unit:
• Cfg Standby. The unit is configured as the standby unit. The unit
configured as the standby switch becomes the stack manager if the
current manager fails.
• Opr Standby. This unit is operating as the standby unit and the
configured standby Unit is not part of the stack.
• None. The switch is not configured as the standby unit.
Switch Status The status of the selected unit. Possible values are as follows:
• OK. The unit is connected and works properly.
• Unsupported. The type of inserted unit is not supported.
• Code Mismatch. The code version is not identical to the
master/management unit.
• Config Mismatch. The inserted device type is different from the
configured devices.
• Not Present. The unit is not connected.
• SDM Mismatch. SDM template mismatch.
• Updating Code. A code update is in progress.
• STM Mismatch. STM template mismatch.
Unit ID The unit ID of the specific switch.
Switch Description The description for the unit that is configured by the user.
Serial Number The unique box serial number for this switch.
Table 71. Stack Configuration (continued)
Field Description