User Manual

Chassis and Stacking
172
M6100, M5300, and M7100 Series Managed Switches
The following table describes the non configurable EPS Ports data that is displayed.
View the Power Matrix
 To view the power matrix:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Chassis > Advanced > Chassis Power Configuration.
The Chassis Power Configuration screen displays.
Table 67. EPS Ports
Field Description
Ports EPS port number counted from left to right while facing rear side of the
chassis.
State EPS port state. Possible state is Not present or Operational.
Sharing Status EPS power sharing status.
Device Type Device type. Possible values are as follows:
• RPS4000v1
• RPS4000v2
• Unknown
EPS/RPS Port Group Group of EPS slots connected to this port. Possible values are as
follows:
• 1,2
• 3,4