User Manual

Chassis and Stacking
171
M6100, M5300, and M7100 Series Managed Switches
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Chassis > Advanced > Chassis Power Configuration.
The Chassis Power Configuration screen displays.
8. Scroll down to the EPS Power Module section.
9. Scroll down to the EPS Ports section..
The following tables describes the EPS power module data and the EPS ports data that is
displayed.
Table 66. EPS Power Modules
Field Description
Slot EPS power module number counted from left to right.
Type EPS power module type. Valid value is Removable.
State EPS power module state. Possible states are as follows:
• Operational
• Not Present
AC EPS power module input voltage category in volts. Possible values
are 110V, 220V, and N/A. N/A specifies that power source input
voltage cannot be obtained.