User Manual

Chassis and Stacking
168
M6100, M5300, and M7100 Series Managed Switches
The following table describes the Blade Power Consumption data that is displayed.
View Power Redundancy
 To view power redundancy:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Chassis > Advanced > Chassis Power Configuration.
Table 63. Chassis Power Modules
Field Description
Unit ID The unit ID that identifies the blade slot.
Blade Type Displays blade type number.
Blade Model Displays blade model.
Current Power Consumption Displays amount of power required by blade (excluding PoE
power) in watts.
Blade Power Required Displays amount of power required by blade (excluding PoE
power) in watts.
Blade Status Displays blade status. The possible values are as follows:
• OK
• Booting up
• Bootup Failed
• Thermal Shutdown
• SW Power Down
• Not Enough Power
• Unknown Blade
• Absent