User Manual

Configure System Information
152
M6100, M5300, and M7100 Series Managed Switches
7. Select System > Services > Timer Schedule > Advanced > Schedule Configuration.
8. In the Timer Schedule Name list, select the timer schedule.
9. In the Timer Schedule Type list, select Absolute or Periodic.
10. In the Timer Schedule Entry list, select the number of the timer schedule entries to be
configured or added.
If you are adding an entry, select new.
11. In the Time Start field, enter the time of the day in format (HH:MM) when the schedule
operation is started.
This field is required. If no time is specified, the schedule does not start running.
12. In the Time End field, enter the time of the day in format (HH:MM) when the schedule
operation is terminated.
13. Use the Date Start to set the schedule start date.
If no date is specified, the schedule starts running immediately.
14. Use the Date Stop to set the schedule termination date.
If No End Date selected, the schedule operates indefinitely.
15. Use the Recurrence Pattern to show with what period the event repeats.
If recurrence is not needed (a timer schedule must be triggered just once), then set Date
Stop as equal to Date Start. There are the following possible values of recurrence:
• Daily. The timer schedule works with daily recurrence
Daily mode. Every WeekDay selection means that the schedule is triggered every
day from Monday to Friday. Every Day(s) selection means that the schedule is
triggered every defined number of days. If number of days is not specified, then the
schedule is triggered every day.
• Weekly. The timer schedule works with weekly recurrence