User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual93
5. Select the Interface.
6. In the Sampling Interval field, enter the interval at which EEE LPI data is collected.
This is a global setting and is applied to all interfaces. The range is 30 to 36000.The
default value is 3600.
7. In the Max Samples T
o Keep field, enter the maximum number of samples to keep.
This is a global setting and is applied to all interfaces. The range is 1 to 168.The default
value is 168.
8. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable fields.
Table 33. Interface Green mode EEE LPI History
Field Description
Percentage LPI time per switch Time spent in LPI mode per switch since EEE counters were last
cleared.
Sample No. Sample index.
Time Since The Sample Was
Recorded
Each time the page is refreshed, it shows a different time as it reflects
the dif
ference in current time and time at which the sample was
recorded.