User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual238
If enabled, the following IGMP snooping modes are automatically enabled:
• Admin mode
• Proxy Querier mode
• Report Flood Mode
• Exclude Mrouter Interface Mode
• Fast Leave
Auto-assignment Mode
The default is Enable.
If disabled, these IGMP snooping modes are automatically disabled.
Note: For information about other settings on the page, see Configure IGMP
Snooping Manually on page 238.
6. Click the Apply button.
Your settings are saved.
The following table displays information about the global IGMP snooping status and statistics
on the page.
Configure IGMP Snooping Manually
You can manually configure the settings for IGMP snooping, which is used to build forwarding
lists for multicast traffic. You can also configure IGMP snooping automatically (see
Configure
IGMP Snooping Automatically with IGMP Plus Mode on page 237).
To configure the settings for IGMP snooping manually:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
Table 87. IGMP Snooping Configuration
Field Description
Multicast Control Frame Count Displays the number of multicast control frames that are processed by the
switch.
Interfaces Enabled for IGMP
Snooping
Displays the interfaces on which IGMP snooping is enabled.
Operational Mode Displays whether IGMP snooping is globally enabled or disabled on the switch.
VLAN IDs Enabled For IGMP
Snooping
Displays the VLANs on which IGMP snooping is enabled.