User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual553
Control Traffic With MAC Filtering
You can configure MAC filters
Configure MAC Filtering
You can create MAC filters that limit the traffic allowed into and out of specified ports on the
system.
To configure MAC filter settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > T
raffic Control > MAC Filter.
This is the list of MAC address and VLAN ID pairings for all configured filters.
5. T
o change the port masks for an existing filter, select the entry.
6. T
o add a new filter, select Create Filter from the MAC Filter list.