User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual519
3. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > Management Security >
Authentication List > HTTPS Authentication
List.
5. Select the check box for the HTTPS list name.
6. In the columns in table header (1, 2, 3, 4, 5, 6), select the method to appear first in the
selected authentication enable list.
The options are as follows:
- Enable.
The privileged EXEC password is used for authentication.
- None.
The user cannot be authenticated.
- RADIUS.
The user's name and password are authenticated using the RADIUS server
instead of local server.
- T
ACACS. The user's name and password are authenticated using the TACACS
server.
7. Click the Apply button.
Your settings are saved.