User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Quality of Service User Manual498
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select QoS > DiffServ > Advanced > Service Statistics.
5. Use the Search menu to search for Dif
fServ statistics by interface or member class:
• T
o search by interface, select Interface, enter the interface in unit/slot/port format (for
example, 1/0/13), and click the Go button.
If the entry exists, the entry is displayed as the first entry, followed by the remaining
entries.
• To search by member class, select Member Class, enter the member class, and click
the Go button.
If an entry with a matching member class exists, the entry is displayed as the first
entry
, followed by the remaining entries. An exact match is required.
6. To refresh the page with the latest information on the switch, click the Refresh button.
The following table describes the information available on the Service Statistics page.
Table 190. DiffServ Service Statistics
Field Description
Interface List of all valid slot number and port number combinations in the
system with a Dif
fServ policy currently attached in In direction.
Direction List of the traffic direction of interface as In. Shows only the direction(s)
for which a Dif
fServ policy is currently attached.