User Manual

Table 21. SDM hardware resources
Number of IPv6 EntriesNumber of IPv4 EntriesModels SupportedTemplate Name
10% of total available90% of total availableAll modelsIPv4-Basic
90% of total available10% of total availableAll modelsIPv6-Basic
10% of total available90% of total availableM4250-16XFIPv4-Advanced
90% of total available10% of total availableM4250-16XFIPv6-Advanced
The main UI provides more information about the templates (see the steps in this task).
The default SMD is IP4v-Basic. You can change the SDM template for the switch.
To change the SDM template
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select System > Management > SDM Template Preference.
The SDM Template Preference page displays.
6. From the SDM Next Template ID menu, select a template.
By default, the IPv4-Basic template is selected.
7. Click the Apply button.
Your settings are saved.
8.
To save the settings to the running configuration, click the Save icon.
9. To activate the new template, restart the switch.
The following table displays Summary information.
Main User Manual88Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual