User Manual

Table 175. Dual image configuration information
DescriptionField
The name of the image. By default, the image names are image1 and image2.Image Name
The current active image (True or False).Active Image
The firmware version of the image.Version
Delete a software image To delete a software image:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Maintenance > File Management > Dual Image Configuration.
The Dual Image Configuration page displays.
6.
Select the check box for the image that is not the active image (that is, the image for
which the Active Image fields shows False)
You cannot delete the active image. For the current active image, the Active Image
field show True.
7. Click the Delete button.
The image is removed.
8.
To save the settings to the running configuration, click the Save icon.
Diagnostics and troubleshooting
You can send a ping, trace a route, and perform a memory dump.
Main User Manual754Maintenance and
Troubleshooting
AV Line of Fully Managed Switches M4250 Series Main User Manual