User Manual

The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Security > Access > HTTPS > HTTPS Configuration.
The HTTPS Configuration page displays.
6. Select the Admin Mode Disable radio button.
7. Click the Apply button.
Your settings are saved. Because you changed the access mode from HTTPS to
HTTP, you are logged out of the switch.
8.
Wait one minute, refresh your browser, and log back in to the switch.
9. Select Maintenance > Upgrade > HTTP File Upgrade.
The HTTP Firmware/File Update page displays.
10.
From the File Type menu, select SSL Trusted Root Certificate PEM File.
11.
Select the Select File Browse button and locate the file that you want to download.
This the certificate file, which must be in the format xxxxCERTxxxxx.pem.
12. Click the Apply button.
The file transfer begins.
The page displays information about the progress of the file transfer. The page
refreshes automatically when the file transfer completes (or if it fails).
13.
From the File Type menu, select SSL Server Certificate PEM File.
This is the key file, which must be in the format xxxxKEYxxxxx.pem.
14.
Select the Select File Browse button and locate the file that you want to download.
The file name can contain up to 80 characters.
15. Click the Apply button.
The file transfer begins.
The page displays information about the progress of the file transfer. The page
refreshes automatically when the file transfer completes.
16.
To save the settings to the running configuration, click the Save icon.
Main User Manual751Maintenance and
Troubleshooting
AV Line of Fully Managed Switches M4250 Series Main User Manual