User Manual

to an SNTP server with a priority value of 1 first, then to a server with a priority value
of 2, and so on. If any servers are assigned the same priority, the SNTP client contacts
the servers in the order that they appear in the table. The range is from 1 to 3. The
default is 1.
10.
In the NTP Version field, specify the NRP version that is supported by the switch.
The range is from 1 to 4. The default is 4.
11. Click the Add button.
The SNTP server entry is added.
12. To add additional SNTP servers, repeat the previous steps.
You can configure up to three SNTP servers.
13.
To save the settings to the running configuration, click the Save icon.
The SNTP Server Status table displays the following information.
Table 17. SNTP server status information
DescriptionField
All the existing server addresses. If no server configuration exists, a message
saying No SNTP server exists flashes on the page.
Address
The local date and time (UTC) that the response from this server was used to
update the system clock.
Last Update Time
The local date and time (UTC) that this SNTP server was last queried.Last Attempt Time
The status of the last S9 NTP request to this server. If no packet was received
from this server, a status of Other is displayed.
•
Other: None of the following enumeration values.
•
Success: The SNTP operation was successful and the system time was updated.
•
Request Timed Out: A directed SNTP request timed out without receiving
a response from the SNTP server.
•
Bad Date Encoded: The time provided by the SNTP server is not valid.
•
Version Not Supported: The SNTP version supported by the server is not
compatible with the version supported by the client.
•
Server Unsynchronized: The SNTP server is not synchronized with its peers.
This is indicated through the leap indicator field on the SNTP message.
•
Server Kiss Of Death: The SNTP server indicated that no further queries were
to be sent to this server. This is indicated by a stratum field equal to 0 in a
message received from a server.
Last Attempt Status
Main User Manual74Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual