User Manual

The syslog server is removed.
Trap log
The trap log includes information about the traps that the switch sent. You can display
and clear the entries in the trap log.
You can also retrieve the trap log and save it as a file. For more information, see Export
a file from the switch on page 739.
To display or clear the trap log:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Monitoring > Logs > Trap Logs.
The Trap Logs page displays.
6.
To refresh the page, click the Refresh button.
7. To clear the log, click the Clear button.
8.
To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Table 171. Trap log information
DescriptionField
The number of traps that occurred since the switch last rebooted.Number of Traps Since Last
Reset
The maximum number of traps stored in the log. If the number of traps exceeds
the capacity, the new entries overwrite the oldest entries.
Trap Log Capacity
Main User Manual716Monitor the Switch and Network
AV Line of Fully Managed Switches M4250 Series Main User Manual