User Manual

Note: The syslog function on the switch can save the log messages simultaneously
to a remote server and to a USB storage device.
9. To simultaneously save the log messages to a USB storage device, in the USB
Filename field, specify the name of the USB file.
The filename cannot include the following symbols: V:*?”<>!. Up to 64 characters
can be entered. The 64 characters are only the filename length, the extension is
automatically added.
10. Click the Apply button.
Your settings are saved.
11.
To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Table 170. Syslog configuration information
DescriptionField
The number of messages received by the log process. This includes messages
that are dropped or ignored.
Messages Received
The number of syslog messages relayed.Messages Relayed
The number of syslog messages ignored.Messages Ignored
Add a syslog server
To add a syslog server:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual713Monitor the Switch and Network
AV Line of Fully Managed Switches M4250 Series Main User Manual