User Manual

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Monitoring > Logs > Command Log Configuration.
The Command Log Configuration page displays.
6.
Select one of the following Admin Status radio buttons:
•
Enable: Enable the switch to log CLI configuration commands. This is the default
setting.
•
Disable: Prevent the switch from logging CLI configuration commands.
7. Click the Apply button.
Your settings are saved.
8.
To save the settings to the running configuration, click the Save icon.
Enable or disable console logging
The switch can log messages to a serial device that is connected to the switch.
To enable or disable console logging:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Monitoring > Logs > Console Log Configuration.
The Console Log Configuration page displays.
6.
Select one of the following Admin Status radio buttons:
•
Enable: Enable the switch to log messages to a serial device. This is the default
setting.
•
Disable: Prevent the switch from logging messages to a serial device.
Main User Manual710Monitor the Switch and Network
AV Line of Fully Managed Switches M4250 Series Main User Manual