User Manual

• ACL Based on Destination IPv6: Creates an ACL based on the destination IPv6
prefix and IPv6 prefix length.
•
ACL Based on Source IPv6: Creates an ACL based on the source IPv6 prefix and
IPv6 prefix length.
• ACL Based on Destination IPv4 L4 Port: Creates an ACL based on the destination
IPv4 Layer 4 port number.
• ACL Based on Source IPv4 L4 Port: Creates an ACL based on the source IPv4
Layer 4 port number.
• ACL Based on Destination IPv6 L4 Port: Creates an ACL based on the destination
IPv6 Layer 4 port number.
• ACL Based on Source IPv6 L4 Port: Creates an ACL based on the source IPv6
Layer 4 port number.
Note: For L4 port options, two rules are created (one for TCP and one for UDP).
7.
In the Sequence Number field, enter a whole number in the range from 1 to
2147483647 that is used to identify the rule.
8.
From the Action menu, select Permit or Deny to specify the action that must be
taken if a packet matches the rule’s criteria.
9.
From the Match Every menu, select one of the following options:
• False: Packets do not need to match the selected ACL and rule. With this selection,
you can add a destination MAC address, destination MAC mask, and VLAN.
• True: All packets must match the selected ACL and rule and are either permitted
or denied. In this case, since all packets match the rule, the option of configuring
other match criteria is not offered.
10.
Specify the additional match criteria for the selected ACL type.
The rest of the rule match criteria fields available for configuration depend on the
selected ACL type. For information about the possible match criteria fields, see the
following table.
Main User Manual649Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual