User Manual

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Control > Captive Portal > CP Client.
The CP Client page displays.
6.
To search for a captive portal user by MAC address, specify the MAC address, and
click the Go button.
If the entry exists, the information for the captive portal user is displayed. An exact
match is required.
7.
To refresh the page, click the Refresh button.
8. To clear the captive portal client statistics, click the Clear button.
9.
To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable information that is displayed.
Table 160. Captive portal client statistics
DescriptionField
The client MAC address.MAC Address
The IP address of the client.IP Address Drops
The connection protocol, which is either HTTP or HTTPS.Protocol
The authentication type, which is Guest, Local, or RADIUS.Verification
The period that passed since the client was authorized.Session Time
The interface the client is using.Interface
The ID of the captive portal.CP ID
The user name (or guest ID) of the connected client.User Name
The total number of bytes the client received.Bytes Received
The total number of bytes the client transmitted.Bytes Transmitted
Main User Manual646Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual