User Manual

By default, the selection is Disable, which means that no password is used and the
password fields are masked out.
10. From the Group menu, select at least one captive portal group.
To assign a user account to more than one group, press the Ctrl key and click each
group. By default, a new user account is assigned to the default group with ID 1.
11.
In the Session Timeout field, enter the period in seconds that a user is permitted
to remain connected to the network.
After the session time-out period is exceeded, the user is logged out automatically.
The default is 0, which means that the session does not time out. The range is from
0 to 86400 seconds.
12.
In the Idle Timeout field, enter the period in seconds that the switch waits before
terminating an idle session and logging out the user.
The default is 0, which means that an idle session does not time out. The range is
from 0 to 900 seconds.
13.
In the Max Bandwidth Down field, enter the maximum rate, in bits per second, at
which a client can receive data from the network.
A value of 0 indicates that the global configuration must be used. The range is from
0 to 536870911 bps.
14.
In the Max Bandwidth Up field, enter the maximum rate, in bits per second, at which
a client can send data into the network.
A value of 0 indicates that the global configuration must be used. The range is from
0 to 536870911 bps.
15.
In the Max Input field, enter the number of octets the user is allowed to receive.
After this limit is reached, the user is disconnected. A value of 0 indicates that the
global limit must be used. The range is from 0 to 4294967295.
16.
In the Max Output field, enter the number of octets the user is allowed to transmit.
After this limit is reached, the user is disconnected. A value of 0 indicates that the
global limit must be used. The range is from 0 to 4294967295.
17.
In the Max Total field, enter the number of bytes the user is allowed to transmit and
receive.
The maximum number of octets is the sum of octets transmitted and received. After
this limit is reached, the user is disconnected. A value of 0 indicates that the global
limit must be used. The range is from 0 to 4294967295.
18.
Do one of the following:
•
If you are adding a new user account, click the Add button.
Main User Manual643Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual