User Manual

Add or modify a captive portal user account To add or modify a captive portal
user account:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Security > Control > Captive Portal > CP User Configuration.
The CP User Configuration page displays.
6.
If you change the settings for an existing user account, select the check box for the
user account.
If you change the settings, you cannot change the user ID and user name.
7.
If you are adding a user account, in the User ID field, specify an ID from 1 to 99 to
identify the user.
After you add the user account, you cannot change the ID.
8.
If you are adding a user account, in the User Name field, enter a name for the user
account.
The name can contain up to 31 alphanumeric characters. After you add the user
account, you cannot change the name.
9.
From the Edit Password menu, select to use a password or no password at all for
the new user account:
•
Enable: The Password and Confirm Password fields are unmasked so that you
can specify a unique password for the new user account:
•
In the Password field, specify a password from 8 to 64 characters.
•
In the Confirm Password field, specify the password again.
•
Disable: The Password and Confirm Password fields are masked out and you
cannot specify a password for the new user account.
Main User Manual642Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual