User Manual

Table 159. Captive portal binding information (Continued)
DescriptionField
Indicates if the captive portal is temporarily blocked for authentication.Block Status
The number of users authenticated through the captive portal on the interface.Authenticated Users
Configure captive portal groups
Captive portal groups let you organize captive portal users, which is useful if a large
number of users must be able to access a captive portal. After you add a captive portal
group, you can add users to the group.
By default, all captive portal users are added to the default group with ID 1. You can
add up to 10 groups.
Add a captive portal group After you add a captive portal group, you can add
captive portal users to the group (see Configure captive portal users on page 641).
To add a captive portal group:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Security > Control > Captive Portal > CP Group Configuration.
The CP Group Configuration page displays.
6.
From the Group ID menu, select an ID for the group.
You can select an ID from 1 to 10.
7.
In the Group Name field, specify a name for the group.
The name can contain from 1 to 31 alphanumeric characters.
8. Click the Add button.
Main User Manual640Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual