User Manual

To display or delete captive portal bindings:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Control > Captive Portal > CP Binding Table.
The CP Binding Table page displays. This table displays the captive portal-to-interface
bindings.
6.
To delete a captive portal-to-interface, do the following:
a.
Select the check box next to the interface.
b. Click the Delete button.
The binding is removed.
7.
To save the settings to the running configuration, click the Save icon.
8.
To refresh the page, click the Refresh button.
The following table describes the nonconfigurable information that is displayed.
Table 159. Captive portal binding information
DescriptionField
The interface to which the captive portal is bound.Interface
The ID of the captive portal.CP ID
Indicates if the portal is active on the interface (Disable or Enable).Operational Status
Main User Manual639Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual