User Manual

25.
In the Max Total field, specify the maximum number of octets that a client is allowed
to transfer, meaning the sum of octets transmitted and received.
After this limit is reached, the client is disconnected. The range is from 0 to
4294967295. The default is 0, which indicates that the limit is not enforced.
26.
Do one of the following:
•
If you are adding a new captive portal, click the Add button.
Your settings are saved. The captive portal is added.
•
If you are changing the default captive portal or a captive portal that you added
before, click the Apply button.
Your settings are saved.
27.
To save the settings to the running configuration, click the Save icon.
Delete a captive portal
You can delete a captive portal that you no longer need.
To delete a captive portal:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Security > Control > Captive Portal > CP Configuration.
The CP Configuration page displays.
6.
Select the check box for the captive portal.
7. Click the Delete button.
The captive portal is removed.
8.
To save the settings to the running configuration, click the Save icon.
Main User Manual637Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual