User Manual

Table 158. Captive portal global configuration information (Continued)
DescriptionField
The number of local users that are configured on the switch.Configured Local Users
The number of users that are authenticated for all captive portal on the switch.Authenticated Users
Configure a captive portal
By default, the switch provides one default captive portal. You can change the settings
for the default captive portal. You can also add and configure up to nine additional
portals.
To configure a captive portal instance:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Security > Control > Captive Portal > CP Configuration.
The CP Configuration page displays.
6.
To do one of the following:
•
Change the default captive portal: Next to CP ID field, select the 1 check box.
•
Add a new captive portal: From the CP ID menu, select an ID from 2 to 10.
•
Change a captive portal that you added before: Next to CP ID field, select the
check box that is associated with the captive portal.
7.
In the CP Name field, specify a name for the captive portal.
The name can be up to 31 alphanumeric characters.
8. From the Admin Mode menu, select Enable or Disable.
This selection sets the administrative mode of the captive portal. By default, a captive
portal is disabled.
Main User Manual634Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual