User Manual

10. Click the Apply button.
Your settings are saved.
11.
To save the settings to the running configuration, click the Save icon.
Manage IPv6 addresses for the IPv6 service port
You can add a static IPv6 address that is specific to the IPv6 service port. You can also
remove an IPv6 address that you no longer need for the IPv6 service port.
To add or remove an IPv6 address for the IPv6 service port:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select System > Management > Management Interfaces > IPv6 Service Port
Configuration.
The IPv6 Service Port Configuration page displays.
The Add/Delete IPv6 Address table lists the static IPv6 addresses that you manually
added to the service port interface.
6.
To add an IPv6 address, in the Add/Delete IPv6 Address section, do the following:
a.
In the IPv6 Address field, specify the IPv6 address that you want to add.
b.
From the EUI FLAG menu, select True to enable the Extended Universal Identifier
(EUI) flag for the IPv6 address, or select False to omit the flag.
c. Click the Add button.
The IPv6 address is added to the IPv6 service port.
7.
To remove an IPv6 address, in the Add/Delete IPv6 Address section, do the following:
a.
Select the check box for the IPv6 address that you want to remove.
b. Click the Delete button.
Main User Manual57Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual