User Manual

You can enter up to 32 characters. The default is blank.
12.
Select the Start File Transfer check box.
13. Click the Apply button.
The file transfer starts. A status message displays during the transfer and upon
successful completion of the transfer.
14.
To save the settings to the running configuration, click the Save icon.
Telnet management access
You can configure Telnet authentication lists and manage outbound and inbound Telnet.
Select Telnet authentication lists
You can select a login authentication list and an enable authentication list:
•
Login authentication list: The login list specifies the authentication methods used
to validate switch or port access for the users associated with the list. For more
information, see Configure a login authentication list on page 514.
•
Enable authentication list: The enable list specifies the authentication methods
used to validate privileged EXEC access for the users associated with the list. For
more information, see Configure an enable authentication list on page 517.
To configure the Telnet authentication lists:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Access > Telnet.
The Telnet page displays.
Main User Manual539Manage Switch Security
AV Line of Fully Managed Switches M4250 Series Main User Manual