User Manual

8. Click the Apply button.
Your settings are saved.
9.
To save the settings to the running configuration, click the Save icon.
Delete a DiffServ policy To delete a DiffServ policy:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select QoS > DiffServ > Advanced > Policy Configuration.
The Policy Configuration page displays.
6. Select the check box next to the policy name.
7. Click the Delete button.
The policy is removed.
8.
To save the settings to the running configuration, click the Save icon.
Configure the DiffServ service interface
You can assign (attach) both an inbound policy and an outbound policy to an interface.
Attach DiffServ policies to an interface To attach DiffServ policies to an interface:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
Main User Manual488Configure Quality of Service
AV Line of Fully Managed Switches M4250 Series Main User Manual