User Manual

Table 137. DiffServ policy configuration, policy attributes
DescriptionField
The name of the DiffServ policy.Policy Name
The type of the policy (In or Out).Policy Type
The class instances that are associated within the policy.Member Class Name
Rename an existing DiffServ policy To rename an existing DiffServ policy:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select QoS > DiffServ > Advanced > Policy Configuration.
The Policy Configuration page displays.
6. Select the check box next to the policy name.
7.
In the Policy Name field, specify the new name.
8. Click the Apply button.
Your settings are saved.
9.
To save the settings to the running configuration, click the Save icon.
Change the policy attributes for an existing DiffServ policy To change
the policy attributes for an existing DiffServ policy:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
Main User Manual486Configure Quality of Service
AV Line of Fully Managed Switches M4250 Series Main User Manual