User Manual

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Routing > Router Discovery > Router Discovery Configuration.
The Router Discovery Configuration page displays.
6.
Select whether to display physical interfaces, VLANs, or both by clicking one of the
following links above the table heading:
•
1: Only physical interfaces are displayed. This is the default setting.
• VLANS: Only VLANs are displayed.
•
All: Both physical interfaces and VLANs are displayed.
7.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the
heading row.
8. From the Advertise Mode menu, select Enable or Disable to enable or disable the
transmission of router advertisements on the interface.
The default is Disable.
9.
In the Advertise Address field, specify the IPv4 address that the interface must use
for router advertisements
10.
In the Maximum Advertise Interval field, specify the maximum period in seconds
that is allowed between router advertisements that are sent from the interface.
The period must be in the range from 4 to 1800. Default value is 600.
11.
In the Minimum Advertise Interval field, specify the minimum period in seconds
that is allowed between router advertisements that are sent from the interface.
The period must be in the range from 3 to 1800. The default is 450.
12.
In the Advertise Lifetime field, specify the maximum period in seconds that the
address that is advertised by the interface is considered a valid router address by
hosts.
The period must be in the range from 4 to 9000. Default is 1800.
Main User Manual391Manage Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual