User Manual

When an access list rule includes a destination IP address and netmask (an extended
access list), the destination IP address is compared to the network mask of the
destination of the route. The destination netmask in the access list serves as a wildcard
mask, indicating which bits in the route's destination mask are significant for the
filtering operation.
10. Click the Apply button.
Your settings are saved.
11.
To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Table 107. RIP route redistribution summary information
DescriptionField
The source route to be redistributed by RIP. The valid values are as follows:
•
Connected
•
Static
Source Protocol
The route redistribution mode for a source protocol. By default this is
disabled.
Redistribute Mode
The metric of redistributed routes for the given source route. The field
displays 0 when the metric is not configured.
Metric
The access list that filters the routes to be redistributed by the destination
protocol. The field displays 0 if not configured.
Distribute List
Router discovery and router advertisements
By default, a routing interface does not send router advertisements.You can enable the
router advertisements for a routing interface and configure the setting for the router
advertisements.
To configure router discovery for a routing interface:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
Main User Manual390Manage Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual