User Manual

Configure 802.1Qav mapping
You can set the global QoS priorities for class A and class B traffic Ethernet audio video
(EAV) streams. Class A streams receive higher priority than class B streams.
To change the 802.1Qav mapping priorities:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Switching > MRP > Basic > MRP Configuration.
The MRP Configuration page displays.
6. Scroll to the 802.1qav Mapping section.
By default, the EAV priority for class A traffic is 3, with a remap priority of 1.
By default, the EAV priority for class B traffic is 2, with a remap priority of 1.
7.
In the EAV Stream column, select the check box for the class.
8.
In the EAV Priority field, specify a priority from 0 to 7.
9.
In the EAV Remap Priority field, specify a priority from 0 to 7.
10. Click the Apply button.
Your settings are saved.
11.
To save the settings to the running configuration, click the Save icon.
Configure the MRP interface settings
You can configure the MRP mode and timer settings for one or more interfaces. The
timers control when and how often various messages are transmitted on each interface.
Main User Manual318Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual