User Manual

Enabling this mode lets MVRP register VLANs in the network, enabling automatic
VLAN configuration on the device. The default is Disable.
7.
Select the MMRP Enable or Disable radio button to specify the global administrative
mode of MMRP on the switch.
Enabling this mode allows for the propagation of MAC address information in the
network. In turn, this allows for the registration and deregistration of both individual
MAC address information and group MAC address membership. The default is
Disable.
8.
Select the MSRP Enable or Disable radio button to specify the global administrative
mode of MSRP on the switch.
Enabling this mode allows the switch to reserve resources in the network to facilitate
time-sensitive traffic to flow end to end. The default is Disable.
9. Select the Periodic State Machine (MVRP Mode) Enable or Disable radio button.
Enabling this mode can limit the effect of MVRP topology changes and reduce the
number of protocol data units (PDUs) transmitted between devices. The default is
Disable.
10. Select the Periodic State Machine (MMRP) Enable or Disable radio button.
Enabling this mode can limit the effect of MMRP topology changes and reduce the
number of protocol data units (PDUs) transmitted between devices. The default is
Disable.
11.
In the MSRP Max Fan In Ports field, specify the maximum number of interfaces on
which MSRP registrations are allowed.
The range is from 0 to 12. The default is 0, which means that no limit is imposed on
the number of interfaces.
12. Select the MSRP Boundary Propagation Enable or Disable radio button.
When you enable MSRP boundary propagation, depending on the configuration, a
stream reservation can be allowed to cross a boundary port.
The default is Disable.
13. Click the Apply button.
Your settings are saved.
14.
To save the settings to the running configuration, click the Save icon.
Main User Manual317Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual