User Manual

To configure the 802.1AS interface settings:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > 802.1AS > Advanced > 802.1AS Port Settings.
The 802.1AS Port Settings page displays.
6.
Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
•
1: Only physical interfaces are displayed. This is the default setting.
• LAG: Only LAGs are displayed.
•
All: Both physical interfaces and LAGs are displayed.
7.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the
heading row.
8. From the Admin Mode menu, select Enable or Disable.
For the 802.1AS settings to take effect on the interface, select Enable. The default
is Disable.
9.
In the Pdelay Threshold field, specify the propagation delay threshold for the
interface.
The threshold determines whether the port is capable of participating in the 802.1AS
protocol. If the propagation delay on the interface is above the threshold you
configure, the interface is not considered capable of participating in the 802.1AS
protocol. The peer delay must be less than the threshold value configured on the
Main User Manual311Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual