User Manual

5. Select Switching > Multicast > MFDB > MFDB Table.
The MFDB Table page displays.
6.
To search for an entry, in the Search by MAC Address, enter a MAC address, and
click the Go button.
If the address exists, that entry is displayed. An exact match is required.
The following table describes the nonconfigurable fields on the page.
Table 64. MFDB information
DescriptionField
The multicast MAC address for which you requested data.MAC Address
The VLAN ID to which the multicast MAC address is related.VLAN ID
The component that is responsible for this entry in the MFDB. The
component can be IGMP snooping, GMRP, Static Filtering, or MLD
snooping.
Component
The type of the entry. Static entries are those that you configure. Dynamic
entries are added to the table as a result of a learning process or protocol.
Type
The description of this multicast table entry. The description can be
Management Configured, Network Configured, or Network Assisted.
Description
The forwarding list that is derived from combining all the forwarding
interfaces and removing the interfaces that are listed as the static filtering
interfaces.
Forwarding Interfaces
Remove the IGMP snooping entries from the multicast
forwarding database
You can remove the IGMP snooping entries from the multicast forwarding database.
To remove the IGMP snooping entries from the multicast forwarding database:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
Main User Manual250Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual