User Manual

•
To configure all interfaces with the same settings, select the check box in the
heading row.
8.
From the GVRP Mode menu, select Enable or Disable to specify the GARP VLAN
registration protocol mode for the port.
If you select Disable, GVRP is not active and the join time, leave time, and leave all
time options are without any effect. The default is Disable.
9.
From the GMRP Mode menu, select Enable or Disable to specify the GARP multicast
registration protocol mode for the port.
If you select Disable, GMRP is not active and the join time, leave time, and leave all
time options are without any effect. The default is Disable.
10.
In the Join Timer field, specify the time in centiseconds between the transmission
of GARP PDUs registering membership for a VLAN or multicast group.
Enter a number between 10 and 100 (0.1 to 1.0 seconds). The default is 20
centiseconds (0.2 seconds). An instance of this timer exists for each GARP participant
for each port.
11.
In the Leave Timer field, specify the time in centiseconds to wait after receiving an
unregister request for a VLAN or multicast group before deleting the associated
entry.
This allows time for another station to assert registration for the same attribute to
maintain uninterrupted service. Enter a number between 20 and 600 (0.2 to 6.0
seconds). The default is 60 centiseconds (0.6 seconds). An instance of this timer
exists for each GARP participant for each port.
12.
In the Leave All Timer field, specify how frequently (in centiseconds) LeaveAll PDUs
are generated.
A LeaveAll PDU indicates that all registrations will be deregistered soon. To maintain
registration, participants must rejoin. The leave all period timer is set to a random
value in the range of LeaveAllTime to 1.5 * LeaveAllTime. The timer is specified in
centiseconds. Enter a number between 200 and 6000 (2 to 60 seconds). The default
is 1000 centiseconds (10 seconds). An instance of this timer exists for each GARP
participant for each port.
13. Click the Apply button.
Your settings are saved.
It can take up to 10 seconds for GARP configuration changes to take effect.
14.
To save the settings to the running configuration, click the Save icon.
Main User Manual218Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual