User Manual

To configure the global EtherType for the DVLAN and configure the DVLAN on one
or more interfaces:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Switching > VLAN > Advanced > Port DVLAN Configuration.
The Port DVLAN Configuration page displays.
6.
From the Global EtherType menu, select a tag type that determines the first 16 bits
of the DVLAN tag:
• 802.1Q Tag: The dot1q tag that represents 0x8100.
• vMAN Tag: The virtual metropolitan area network (vMAN) tag that represents
0x88A8.
•
Custom Tag: A custom EtherType tag in the range from 0 to 65535. With this
selection the Custom Value field displays.
7.
if you select Custom Tag from the Global EtherType menu, enter the custom
EtherType tag in the Custom Value field.
The tag can be in the range from 0 to 65535.
8.
Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
•
1: Only physical interfaces are displayed. This is the default setting.
• LAG: Only LAGs are displayed.
•
All: Both physical interfaces and LAGs are displayed.
9.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
Main User Manual213Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual