User Manual

A pop-up window displays the members.
8.
To select physical interfaces for the VLAN, do one the following:
•
Select all physical interfaces: Click the Ports icon above the Ports table.
•
Select individual physical interfaces: In the Ports table, click one or more ports
individually.
9.
To select LAGs for the VLAN, do one the following:
• Select all LAGs: Click the LAG icon above the LAG table.
• Select individual LAGs: In the LAG table, click one or more LAGs individually.
10. Click the Apply button.
Your settings are saved.
11.
To save the settings to the running configuration, click the Save icon.
Configure an IP subnet-based VLAN
You configure an IP subnet-to-VLAN mapping by specifying a source IP address, network
mask, and the VLAN ID. The IP subnet-to-VLAN configurations are shared across all
interfaces of the switch.
Add an IP subnet-based VLAN You can add an IP subnet-based VLAN.
To add an IP subnet-based VLAN:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > VLAN > Advanced > IP Subnet Based VLAN.
The IP Subnet Based VLAN page displays.
6.
In the IP Address field, specify an IP address.
Enter the IP address in dotted-decimal notation.
Main User Manual211Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual