User Manual

VLAN IDs range from 1 to 4093. Use a hyphen (-) to specify a range or a comma (,)
to separate VLAN IDs in a list. Spaces and zeros are not permitted. To reset the VLAN
tag configuration to the defaults, use the None keyword. Port tagging for the VLAN
can be set only if the interface is a member of this VLAN.
11.
From the Acceptable Frame Types menu, select the types of frames that can be
received on the interface:
•
VLAN only: Untagged frames and priority-tagged frames received on the interface
are discarded. VLAN-tagged frames are forwarded in accordance to the 802.1Q
VLAN specification.
•
Admit All: Untagged frames and priority-tagged frames received on the interface
are accepted and assigned the value of the port VLAN ID for the interface.
VLAN-tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.
•
Admit Untagged Only: Untagged frames received on the interface are accepted.
VLAN-tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.
12.
From the Ingress Filtering menu, select one of the following options:
•
Enabled: The frame is discarded if the interface is not a member of the VLAN with
which this frame is associated. In a tagged frame, the VLAN is identified by the
VLAN ID in the tag. In an untagged frame, the VLAN is the port VLAN ID of the
interface that receives this frame.
•
Disabled: All frames are forwarded in accordance with the 802.1Q VLAN bridge
specification. The default is Disabled.
13.
In the Port Priority field, specify the default 802.1p priority assigned to untagged
packets arriving at the port.
You can enter a number from 0 to 7.
14. Click the Apply button.
Your settings are saved.
15.
To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Main User Manual204Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual