User Manual

To configure the PVID and PVID-related settings:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5.
Select Switching > VLAN > Advanced > Port PVID Configuration.
The Port PVID Configuration page displays.
6.
Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
•
1: Only physical interfaces are displayed. This is the default setting.
• LAG: Only LAGs are displayed.
•
All: Both physical interfaces and LAGs are displayed.
7.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the
heading row.
8.
In the PVID field, specify the VLAN ID to assign to untagged or priority-tagged frames
received on this interface.
The default is 1.
9.
In the VLAN Member field, specify the VLAN ID or list of VLANs of a member
interface.
VLAN IDs range from 1 to 4093. The default is 1. Use a hyphen (-) to specify a range
or a comma (,) to separate VLAN IDs in a list. Spaces and zeros are not permitted.
10.
In the VLAN Tag field, specify the VLAN ID or list of VLANs of a tagged interface.
Main User Manual203Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual